AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
133
CONNECT // establish a connection via service code 99, IP address 123…
//and L2P = PPP and using CID 1.
// The CID has to be defined by means of AT+CGDCONT
ATD*99**PPP#
CONNECT // establish a connection via service code 99 and L2P = PPP
ATD*99***1#
CONNECT // establish a connection via service code 99 and using CID 1
ATD*99*PPP*1#
CONNECT // establish a connection via service code 99 and L2P = PPP and
// using CID 1. The CID has to be defined by means of AT+CGDCONT
ATD*98#
CONNECT // establish an IP connection via service code 98
ATD*98*1#
CONNECT // establish an IP connection via service code 98 using CID 1
// The CID has to be defined by means of AT+CGDCONT
4.4 The AT^SVMC command
In this section examples for the use of the AT^SVMC command are provided:
Test command
The Test command returns a list of possible actions, a list of available indexes of Voice Memos, the
remaining recording time and maximum length for the name of a Voice Memo.
Sample input plus output:
AT^SVMC=?
^SVMC: (0-5),14,132,”00:04:15”
Meaning:
• All actions (0-5) are possible,
• Currently there are 14 voice memos
• The maximum length for a voice memo name in this example is 132 bytes
• The remaining recording time is 4 minutes and 15 seconds
Write-command
The Write command is used to control the Voice Memo functionality of the mobile. The action
parameter lets you start, stop, pause, or cancel the playback of a voice memo. Also, this command
can be used to start, stop, cancel and pause the recording of a voice memo.
Sample input and resulting output:
AT^SVMC=0
Comments to this Manuals