CME GPP-3 Specifications Page 100
- Page / 164
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
10
0
Release 6
8.41 Time Zone Reporting +CTZR
Table 101: +CTZR parameter command syntax
Command
Possible response(s)
+CTZR=<onoff>
+CME ERROR: <err>
+CTZR?
+CTZR: <onoff>
+CME ERROR: <err>
+CTZR=?
+CTZR: (list of supported <onoff>s)
+CME ERROR: <err>
Description
This set command enables and disables the time zone change event reporting. If the reporting is enabled the MT returns
the unsolicited result code +CTZV: <tz> whenever the time zone is changed. If setting fails in an MT error, +CME
ERROR: <err> is returned. Refer subclause 9.2 for <err> values.
Read command returns the current reporting settings in the MT.
Test command returns supported <onoff>-values.
NOTE: The Time Zone reporting is not affected by the Automatic Time Zone setting command, +CTZU.
Defined values
<onoff>: integer type value indicating:
0
– disable time zone change event reporting (default).
1 – Enable time zone change event reporting.
Implementation
Optional.
8.42 Enter protocol mode+CPROT
Table 102: +CPROT parameter command syntax
Command
Possible response(s)
+CPROT=<proto>[,<version
>[,<lsap1>[,...[<lsapN>]]
]]
CONNECT
NO CARRIER
OK
ERROR
+CME ERROR: <err>
+CPROT=?
+CPROT: <proto1>[,(list of supported
<version>s)[,(list of supported
<lsap1>s)[,...[,(list of supported
<lsapN>s)]]]]
[<CR><LF>
+CPROT : <proto2>[,(list of supported
<version>s)[,(list of supported
<lsap1>s)[,...[,(list of supported
<lsapN>s)]]]]]
[...]]]]]
Description
Set command informs TA that TE wants to establish a peer-to-peer protocol <proto> or upper layer connection
(indicating by the <lsap>s setting) with the MT on the link from which the command was received.
This command can be used in case the link between TE and MT does not provide itself such a mechanism.
- V6.3.0 (2003-06) 1
- Contents 3
- 3GPP TS 27.007 V6.3.0 (2003 4
- Release 6 4
- Foreword 7
- 2 References 8
- 3.1 Definitions 12
- 3.2 Abbreviations 12
- 4 AT command syntax 13
- 5 General commands 15
- +CME ERROR: <err> 18
- 5.10 Informative examples 22
- 6.4 Call mode +CMOD 25
- 6.5 Hangup call +CHUP 25
- is implemented 26
- 6.8 Radio link protocol +CRLP 29
- 6.23 Silence Command +CSIL 40
- 6.27 Informative examples 42
- 7.1 Subscriber number +CNUM 43
- 7.3 PLMN selection +COPS 45
- 7.4 Facility lock +CLCK 47
- 7.5 Change password +CPWD 48
- 7.10 Closed user group +CCUG 52
- 7.12 Call waiting +CCWA 55
- 7.14 Call deflection +CTFR 57
- 7.16 Advice of Charge +CAOC 59
- 7.18 List current calls +CLCC 61
- PLMNwAcT 64
- PLMNsel 64
- OPLMNwAcT 64
- HPLMNwAcT 64
- 7.27 Informative examples 68
- 8.3 Enter PIN +CPIN 72
- 8.4 Battery charge +CBC 73
- 8.5 Signal quality +CSQ 74
- 8.7 Keypad control +CKPD 75
- 8.8 Display control +CDIS 76
- 8.9 Indicator control +CIND 77
- 8.15 Clock +CCLK 83
- 8.16 Alarm +CALA 84
- 8.17 Generic SIM access +CSIM 85
- 8.20 Alert sound mode +CALM 88
- 8.21 Ringer sound level +CRSL 88
- 8.22 Vibrator mode +CVIB 89
- 8.24 Mute control +CMUT 90
- 8.29 Power class +CPWC 92
- 8.30 Set Language +CLAN 93
- 8.31 Language Event +CLAE 94
- 8.32 Set Greeting Text +CSGT 94
- 8.36 Master Reset +CMAR 97
- 8.38 Delete alarm +CALD 98
- ...[<lsapN>]] 100
- 8.43 Informative examples 101
- MODE 103
- DATA MODE 103
- 9.2.1 General errors 105
- 9.2.2 GPRS-related errors 106
- 9.2.2.3 Other GPRS errors 107
- 10 Commands for Packet Domain 108
- (Obsolete) 128
- 11 Commands for VGCS and VBS 137
- ELEASED (default value) 140
- USHED for an infinite time 140
- The MT assumes to be 142
- 11.4 Informative examples 146
- Annex A (normative): 147
- Annex B (normative): 149
- Summary of result codes 149
- Annex C (informative): 151
- Commands from TIA IS-101 151
- C.1 Introduction 151
- C.2 Commands 152
- C.2.7 Inactivity timer +VIT 154
- C.2.8 Line selection +VLS 154
- C.2.9 Receive data state +VRX 156
- C.2.12 Tone duration +VTD 157
- Annex D (informative): 159
- Bibliography 159
- Annex E (informative): 160
- Annex F (informative): 161
- Annex G (informative): 162
- Voice call example 162
- Annex H (informative): 163
- Change History 163
Related products and manuals for Music Pedal CME GPP-3
Music Pedal CME GPP-3 Specifications
(152 pages)
(152 pages)
© 2020, manymanuals.com. All rights reserved. | 1.700 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals