CME GPP-3 Specifications Page 85
- Page / 164
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
8
5
Release 6
Defined values
<time>: refer +CCLK,+CSDF
NOTE: If the <recurr>-parameter is used, the <time>-parameter must not contain a date.
<n>, <n1>, <n2>: integer type value indicating the index of the alarm; default is manufacturer specific
<type>: integer type value indicating the type of the alarm (e.g. sound, volume, LED); values and default are
manufacturer specific
<text>: string type value indicating the text to be displayed when alarm time is reached; maximum length
<tlength>
<tlength>: integer type value indicating the maximum length of <text>
<recurr>: string type value indicating day of week for the alarm in one of the following formats:
"<1..7>[,<1..7>[…]]" – Sets a recurrent alarm for one or more days in the week. The digits 1 to 7 corresponds to
the days in the week, Monday (1), …, Sunday (7).
Example: The string "1,2,3,4,5" may be used to set an alarm for all weekdays.
"0" – Sets a recurrent alarm for all days in the week.
<rlength>: integer type value indicating the maximum length of <recurr>
<silent>: Integer type value indicating if the alarm is silent or not. If set to 1 the alarm will be silent and the only
result from the alarm is the unsolicited result code +CALV. If set to 0 the alarm will not be silent.
Implementation
Optional.
8.17 Generic SIM access +CSIM
Table 77: +CSIM action command syntax
Command
Possible response(s)
+CSIM=<length>,<command>
+CSIM: <length>,<response>
+CME ERROR: <err>
+CSIM=?
Description
Set command transmits to the MT the <command> it then shall send as it is to the SIM. In the same manner the SIM
<response> shall be sent back by the MT to the TA as it is. Refer subclause 9.2 for <err> values.
This command allows a direct control of the SIM by an distant application on the TE. The TE shall then take care of
processing SIM information within the frame specified by GSM/UMTS.
NOTE: Compared to Restricted SIM Access command +CRSM, the definition of +CSIM allows TE to take more
control over the SIM-MT interface. The locking and unlocking of the interface may be done by a special
<command> value or automatically by TA/MT (by interpreting <command> parameter). In case that TE
application does not use the unlock command (or does not send a <command> causing automatic
unlock) in a certain timeout value, MT may release the locking.
Defined values
<length> : integer type; length of the characters that are sent to TE in <command> or <response> (two times
the actual length of the command or response)
<command> : command passed on by the MT to the SIM in the format as described in GSM 51.011 [28]
(hexadecimal character format; refer +CSCS)
- V6.3.0 (2003-06) 1
- Contents 3
- 3GPP TS 27.007 V6.3.0 (2003 4
- Release 6 4
- Foreword 7
- 2 References 8
- 3.1 Definitions 12
- 3.2 Abbreviations 12
- 4 AT command syntax 13
- 5 General commands 15
- +CME ERROR: <err> 18
- 5.10 Informative examples 22
- 6.4 Call mode +CMOD 25
- 6.5 Hangup call +CHUP 25
- is implemented 26
- 6.8 Radio link protocol +CRLP 29
- 6.23 Silence Command +CSIL 40
- 6.27 Informative examples 42
- 7.1 Subscriber number +CNUM 43
- 7.3 PLMN selection +COPS 45
- 7.4 Facility lock +CLCK 47
- 7.5 Change password +CPWD 48
- 7.10 Closed user group +CCUG 52
- 7.12 Call waiting +CCWA 55
- 7.14 Call deflection +CTFR 57
- 7.16 Advice of Charge +CAOC 59
- 7.18 List current calls +CLCC 61
- PLMNwAcT 64
- PLMNsel 64
- OPLMNwAcT 64
- HPLMNwAcT 64
- 7.27 Informative examples 68
- 8.3 Enter PIN +CPIN 72
- 8.4 Battery charge +CBC 73
- 8.5 Signal quality +CSQ 74
- 8.7 Keypad control +CKPD 75
- 8.8 Display control +CDIS 76
- 8.9 Indicator control +CIND 77
- 8.15 Clock +CCLK 83
- 8.16 Alarm +CALA 84
- 8.17 Generic SIM access +CSIM 85
- 8.20 Alert sound mode +CALM 88
- 8.21 Ringer sound level +CRSL 88
- 8.22 Vibrator mode +CVIB 89
- 8.24 Mute control +CMUT 90
- 8.29 Power class +CPWC 92
- 8.30 Set Language +CLAN 93
- 8.31 Language Event +CLAE 94
- 8.32 Set Greeting Text +CSGT 94
- 8.36 Master Reset +CMAR 97
- 8.38 Delete alarm +CALD 98
- ...[<lsapN>]] 100
- 8.43 Informative examples 101
- MODE 103
- DATA MODE 103
- 9.2.1 General errors 105
- 9.2.2 GPRS-related errors 106
- 9.2.2.3 Other GPRS errors 107
- 10 Commands for Packet Domain 108
- (Obsolete) 128
- 11 Commands for VGCS and VBS 137
- ELEASED (default value) 140
- USHED for an infinite time 140
- The MT assumes to be 142
- 11.4 Informative examples 146
- Annex A (normative): 147
- Annex B (normative): 149
- Summary of result codes 149
- Annex C (informative): 151
- Commands from TIA IS-101 151
- C.1 Introduction 151
- C.2 Commands 152
- C.2.7 Inactivity timer +VIT 154
- C.2.8 Line selection +VLS 154
- C.2.9 Receive data state +VRX 156
- C.2.12 Tone duration +VTD 157
- Annex D (informative): 159
- Bibliography 159
- Annex E (informative): 160
- Annex F (informative): 161
- Annex G (informative): 162
- Voice call example 162
- Annex H (informative): 163
- Change History 163
Related products and manuals for Music Pedal CME GPP-3
Music Pedal CME GPP-3 Specifications
(152 pages)
(152 pages)
© 2020, manymanuals.com. All rights reserved. | 0.544 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals