CME GPP-3 Specifications Page 84
- Page / 164
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
8
4
Release 6
+CCLK?
+CCLK: <time>
+CME ERROR: <err>
+CCLK=?
Description
Set command sets the real-time clock of the MT. If setting fails in an MT error, +CME ERROR: <err> is returned.
Refer subclause 9.2 for <err> values.
Read command returns the current setting of the clock.
Defined values
<time>: string type value; format is "yy/MM/dd,hh:mm:ss±zz", where characters indicate year (two last digits),
month, day, hour, minutes, seconds and time zone (indicates the difference, expressed in quarters of an hour,
between the local time and GMT; range -47...+48). E.g. 6th of May 1994, 22:10:00 GMT+2 hours equals to
"94/05/06,22:10:00+08"
NOTE: If MT does not support time zone information then the three last characters of <time> are not returned by
+CCLK?. The format of <time> is specified by use of the +CSDF command.
Implementation
Optional.
8.16 Alarm +CALA
Table 76: +CALA parameter command syntax
Command
Possible response(s)
+CALA=<time>[,<n>[,<type>
[,<text>[,<recurr>[,<silent
>]]]]]
+CME ERROR: <err>
+CALA?
[+CALA:
<time>,<n1>,<type>,[<text>],[<recurr>],<silent
>
[<CR><LF>+CALA:
<time>,<n2>,<type>,[<text>],[<recurr>],<silent
>
[...]]]
+CME ERROR: <err>
+CALA=?
+CALA: (list of supported <n>s),(list of supported
<type>s),<tlength>,<rlength>,(list of supported
<silent>s)
+CME ERROR: <err>
Description
Set command sets an alarm time in the MT. There can be an array of different types of alarms, and each alarm may
cause different text to be displayed in the MT display. If setting fails in an MT error, +CME ERROR: <err> is
returned. Refer subclause 9.2 for <err> values.
To set up a recurrent alarm for one or more days in the week, the <recurr>-parameter may be used.
When an alarm is timed out and executed, the unsolicited result code +CALV: <n> is always returned, even if the
alarm is set up to be silent.
Read command returns the list of current active alarm settings in the MT.
Test command returns supported array index values, alarm types, and maximum length of the text to be displayed.
- V6.3.0 (2003-06) 1
- Contents 3
- 3GPP TS 27.007 V6.3.0 (2003 4
- Release 6 4
- Foreword 7
- 2 References 8
- 3.1 Definitions 12
- 3.2 Abbreviations 12
- 4 AT command syntax 13
- 5 General commands 15
- +CME ERROR: <err> 18
- 5.10 Informative examples 22
- 6.4 Call mode +CMOD 25
- 6.5 Hangup call +CHUP 25
- is implemented 26
- 6.8 Radio link protocol +CRLP 29
- 6.23 Silence Command +CSIL 40
- 6.27 Informative examples 42
- 7.1 Subscriber number +CNUM 43
- 7.3 PLMN selection +COPS 45
- 7.4 Facility lock +CLCK 47
- 7.5 Change password +CPWD 48
- 7.10 Closed user group +CCUG 52
- 7.12 Call waiting +CCWA 55
- 7.14 Call deflection +CTFR 57
- 7.16 Advice of Charge +CAOC 59
- 7.18 List current calls +CLCC 61
- PLMNwAcT 64
- PLMNsel 64
- OPLMNwAcT 64
- HPLMNwAcT 64
- 7.27 Informative examples 68
- 8.3 Enter PIN +CPIN 72
- 8.4 Battery charge +CBC 73
- 8.5 Signal quality +CSQ 74
- 8.7 Keypad control +CKPD 75
- 8.8 Display control +CDIS 76
- 8.9 Indicator control +CIND 77
- 8.15 Clock +CCLK 83
- 8.16 Alarm +CALA 84
- 8.17 Generic SIM access +CSIM 85
- 8.20 Alert sound mode +CALM 88
- 8.21 Ringer sound level +CRSL 88
- 8.22 Vibrator mode +CVIB 89
- 8.24 Mute control +CMUT 90
- 8.29 Power class +CPWC 92
- 8.30 Set Language +CLAN 93
- 8.31 Language Event +CLAE 94
- 8.32 Set Greeting Text +CSGT 94
- 8.36 Master Reset +CMAR 97
- 8.38 Delete alarm +CALD 98
- ...[<lsapN>]] 100
- 8.43 Informative examples 101
- MODE 103
- DATA MODE 103
- 9.2.1 General errors 105
- 9.2.2 GPRS-related errors 106
- 9.2.2.3 Other GPRS errors 107
- 10 Commands for Packet Domain 108
- (Obsolete) 128
- 11 Commands for VGCS and VBS 137
- ELEASED (default value) 140
- USHED for an infinite time 140
- The MT assumes to be 142
- 11.4 Informative examples 146
- Annex A (normative): 147
- Annex B (normative): 149
- Summary of result codes 149
- Annex C (informative): 151
- Commands from TIA IS-101 151
- C.1 Introduction 151
- C.2 Commands 152
- C.2.7 Inactivity timer +VIT 154
- C.2.8 Line selection +VLS 154
- C.2.9 Receive data state +VRX 156
- C.2.12 Tone duration +VTD 157
- Annex D (informative): 159
- Bibliography 159
- Annex E (informative): 160
- Annex F (informative): 161
- Annex G (informative): 162
- Voice call example 162
- Annex H (informative): 163
- Change History 163
Related products and manuals for Music Pedal CME GPP-3
Music Pedal CME GPP-3 Specifications
(152 pages)
(152 pages)
© 2020, manymanuals.com. All rights reserved. | 0.146 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals