CME GPP-3 Specifications Page 45
- Page / 164
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
4
5
Release 6
Defined values
<n>:
0
disable network registration unsolicited result code
1 enable network registration unsolicited result code +CREG: <stat>
2 enable network registration and location information unsolicited result code +CREG:
<stat>[,<lac>,<ci>]
<stat>:
0 not registered, MT is not currently searching a new operator to register to
1 registered, home network
2 not registered, but MT is currently searching a new operator to register to
3 registration denied
4 unknown
5 registered, roaming
<lac>: string type; two byte location area code in hexadecimal format (e.g. "00C3" equals 195 in decimal)
<ci>: string type; two byte cell ID in hexadecimal format
Implementation
Optional.
7.3 PLMN selection +COPS
Table 36: +COPS parameter command syntax
Command
Possible response(s)
+COPS=[<mode>[,<format>
[,<oper>[,< AcT>]]]]
+CME ERROR: <err>
+COPS?
+COPS: <mode>[,<format>,<oper>[,< AcT>]]
+CME ERROR: <err>
+COPS=?
+COPS: [list of supported (<stat>,long alphanumeric <oper>
,short alphanumeric <oper>,numeric <oper>[,< AcT>])s]
[,,(list of supported <mode>s),(list of supported <format>s)]
+CME ERROR: <err>
Description
Set command forces an attempt to select and register the GSM/UMTS network operator. <mode> is used to select
whether the selection is done automatically by the MT or is forced by this command to operator <oper> (it shall be
given in format <format>) to a certain access technology, indicated in <AcT>. If the selected operator is not
available, no other operator shall be selected (except <mode>=4). The selected operator name format shall apply to
further read commands (+COPS?) also. <mode>=2 forces an attempt to deregister from the network. The selected
mode affects to all further network registration (e.g. after <mode>=2, MT shall be unregistered until <mode>=0 or 1 is
selected). Refer subclause 9.2 for possible <err> values. This command should be abortable when
registration/deregistration attempt is made.
Read command returns the current mode, the currently selected operator and the current Access Technology. If no
operator is selected, <format>, <oper> and < AcT> are omitted.
- V6.3.0 (2003-06) 1
- Contents 3
- 3GPP TS 27.007 V6.3.0 (2003 4
- Release 6 4
- Foreword 7
- 2 References 8
- 3.1 Definitions 12
- 3.2 Abbreviations 12
- 4 AT command syntax 13
- 5 General commands 15
- +CME ERROR: <err> 18
- 5.10 Informative examples 22
- 6.4 Call mode +CMOD 25
- 6.5 Hangup call +CHUP 25
- is implemented 26
- 6.8 Radio link protocol +CRLP 29
- 6.23 Silence Command +CSIL 40
- 6.27 Informative examples 42
- 7.1 Subscriber number +CNUM 43
- 7.3 PLMN selection +COPS 45
- 7.4 Facility lock +CLCK 47
- 7.5 Change password +CPWD 48
- 7.10 Closed user group +CCUG 52
- 7.12 Call waiting +CCWA 55
- 7.14 Call deflection +CTFR 57
- 7.16 Advice of Charge +CAOC 59
- 7.18 List current calls +CLCC 61
- PLMNwAcT 64
- PLMNsel 64
- OPLMNwAcT 64
- HPLMNwAcT 64
- 7.27 Informative examples 68
- 8.3 Enter PIN +CPIN 72
- 8.4 Battery charge +CBC 73
- 8.5 Signal quality +CSQ 74
- 8.7 Keypad control +CKPD 75
- 8.8 Display control +CDIS 76
- 8.9 Indicator control +CIND 77
- 8.15 Clock +CCLK 83
- 8.16 Alarm +CALA 84
- 8.17 Generic SIM access +CSIM 85
- 8.20 Alert sound mode +CALM 88
- 8.21 Ringer sound level +CRSL 88
- 8.22 Vibrator mode +CVIB 89
- 8.24 Mute control +CMUT 90
- 8.29 Power class +CPWC 92
- 8.30 Set Language +CLAN 93
- 8.31 Language Event +CLAE 94
- 8.32 Set Greeting Text +CSGT 94
- 8.36 Master Reset +CMAR 97
- 8.38 Delete alarm +CALD 98
- ...[<lsapN>]] 100
- 8.43 Informative examples 101
- MODE 103
- DATA MODE 103
- 9.2.1 General errors 105
- 9.2.2 GPRS-related errors 106
- 9.2.2.3 Other GPRS errors 107
- 10 Commands for Packet Domain 108
- (Obsolete) 128
- 11 Commands for VGCS and VBS 137
- ELEASED (default value) 140
- USHED for an infinite time 140
- The MT assumes to be 142
- 11.4 Informative examples 146
- Annex A (normative): 147
- Annex B (normative): 149
- Summary of result codes 149
- Annex C (informative): 151
- Commands from TIA IS-101 151
- C.1 Introduction 151
- C.2 Commands 152
- C.2.7 Inactivity timer +VIT 154
- C.2.8 Line selection +VLS 154
- C.2.9 Receive data state +VRX 156
- C.2.12 Tone duration +VTD 157
- Annex D (informative): 159
- Bibliography 159
- Annex E (informative): 160
- Annex F (informative): 161
- Annex G (informative): 162
- Voice call example 162
- Annex H (informative): 163
- Change History 163
Related products and manuals for Music Pedal CME GPP-3
Music Pedal CME GPP-3 Specifications
(152 pages)
(152 pages)
© 2020, manymanuals.com. All rights reserved. | 0.780 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals