3GPP TS 27.007 V6.3.0 (2003-
06)
- label=17: the phone is connected to the radio system and there is a path to the internal loudspeaker and to the
radio transmitter. This allows the computer to simultaneously play sound and send audio over the radio by
selecting "transmit mode".
Table C.15: +VLS label 17
microphone -->
computer o/p -->
C.2.9 Receive data state +VRX
This action command causes the TA to get audio data from a source determined by the +VLS command, and send it to
the computer. Once the datastream has started, any result codes will be embedded in the data and shielded using the
normal <DLE> methods. The receive process is terminated when the computer sends any command to the TA, or by
time-out of the inactivity timer. The command is write only.
Table C.16: +VRX
C.2.10 Select compression method +VSM
This selects the voice compression method <n1>, the voice sampling rate <n2>, the silence compression sensitivity
<n3>, and a parameter related to silence expansion <n4>. There are several choices of compression method. IS-101
does not specify methods, but here is a list of some usual compression methods:
Name
Communications system
GSM/full-rate GSM
GSM/half-rate GSM
ADPCM/G.721 DECT, CT2
ADPCM/G.723 DECT, CT2
ADPCM/G.726 DECT, CT2
ADPCM/G.727 DECT, CT2
SIGNED PCM POTS
Table C.17: +VSM
+VSM=<n1>,<n2>,<n3>,<n4>
+VSM?
NOTE: A value of <n3>=0 implies no silence compression sensitivity. A value of <n4>=0 implies no silence
expansion.
Comments to this Manuals